# A colossal breakthrough for topological spintronics

July 31, 2018Scientists have developed the world's best-performing pure spin current source[1] made of bismuth-antimony (BiSb) alloys, which they report as the best candidate for the first industrial application of topological insulators[2]. The achievement represents a big step forward in the development of spin-orbit torque magnetoresistive random-access memory (SOT-MRAM)[3] devices with the potential to replace existing memory technologies.

A research team led by Pham Nam Hai at the Department of Electrical and Electronic Engineering, Tokyo Institute of Technology (Tokyo Tech), has developed thin films of BiSb for a topological insulator that simultaneously achieves a colossal spin Hall effect[4] and high electrical conductivity.

Their study, published in

*Nature Materials*, could accelerate the development of high-density, ultra-low power, and ultra-fast non-volatile memories for Internet of Things (IoT) and other applications now becoming increasingly in demand for industrial and home use.

The BiSb thin films achieve a colossal spin Hall angle of approximately 52, conductivity of 2.5 x 10

^{5}and spin Hall conductivity of 1.3×10

^{7}at room temperature. (See Table 1 for a performance summary, including all units.) Notably, the spin Hall conductivity is two orders of magnitude greater than that of bismuth selenide (Bi

_{2}Se

_{3}), reported in

*Nature*in 2014.

**Making SOT-MRAM a viable choice**

Until now, the search for suitable spin Hall materials for next-generation SOT-MRAM devices has been faced with a dilemma: First, heavy metals such as platinum, tantalum and tungsten have high electrical conductivity but a small spin Hall effect. Second, topological insulators investigated to date have a large spin Hall effect but low electrical conductivity.

The BiSb thin films satisfy both requirements at room temperature. This raises the real possibility that BiSb-based SOT-MRAM could outperform the existing spin-transfer torque (STT) MRAM technology.

"As SOT-MRAM can be switched one order of magnitude faster than STT-MRAM, the switching energy can be reduced by at least two orders of magnitude," says Pham. "Also, the writing speed could be increased 20 times and the bit density increased by a factor of ten."

The viability of such energy-efficient SOT-MRAMs has recently been demonstrated in experiments, albeit using heavy metals, conducted by IMEC, the international R&D and innovation hub headquartered in Leuven, Belgium.

If scaled up successfully, BiSb-based SOT-MRAM could drastically improve upon its heavy metal-based counterparts and even become competitive with dynamic random access memory (DRAM), the dominant technology of today.

**An attractive, overlooked material**

BiSb has tended to be overlooked by the research community due to its small band gap[5] and complex surface states. However, Pham says: "From an electrical engineering perspective, BiSb is very attractive due to its high carrier mobility, which makes it easier to drive a current within the material."

"We knew that BiSb has many topological surface states, meaning we could expect a much stronger spin Hall effect. That's why we started studying this material about two years ago."

The thin films were grown using a high-precision method called molecular beam epitaxy (MBE). The researchers discovered a particular surface orientation named BiSb(012), which is thought to be a key factor behind the large spin Hall effect. Pham points out that the number of Dirac cones[6]0 on the BiSb(012) surface is another important factor, which his team is now investigating.

**Challenges ahead**

Pham is currently collaborating with industry to test and scale up BiSb-based SOT-MRAM.

"The first step is to demonstrate manufacturability," he says. "We aim to show it's still possible to achieve a strong spin Hall effect, even when BiSb thin films are fabricated using industry-friendly technologies such as the sputtering method."

"It's been over ten years since the emergence of topological insulators, but it was not clear whether those materials could be used in realistic devices at room temperature. Our research brings topological insulators to a new level, where they hold great promise for ultra-low power SOT-MRAM."

-end-

**Technical terms**

[1] Pure spin current: A phenomenon whereby spin angular momentum, but not charge, is transported.

[2] Topological insulators: Materials with highly electrically conductive surfaces, but which act as insulators on the inside. Such materials are of great interest in the quest to develop high-performing electronic devices that generate less heat.

[3] SOT-MRAM: Spin-orbit torque (SOT) switching using the spin Hall effect is increasingly viewed as a successor to conventional spin-transfer torque (STT) switching for magnetoresistive random-access memory (MRAM) technologies.

[4] Spin Hall effect: A Hall effect for spins originating from the coupling of charge and spin. Pure spin currents can be generated via the spin Hall effect.

[5] Band gap: An energy range in an insulator or semiconductor in which no electron states can exist.

[6] Dirac cones: Unique electronic structures that occur in topological insulators that represent linear energy dispersion.

https://www.titech.ac.jp/english/research/stories/faces24_pham.html

http://magn.pe.titech.ac.jp/lab/

Tokyo Institute of Technology

## Related Topological Insulators Articles from Brightsurf:

Tunable THz radiation from 3D topological insulator

Wu's research group has been investigating a three-dimensional topological insulator of bismuth telluride (Bi2Te3) as a promising basis for an effective THz system.

Knotting semimetals in topological electrical circuits

Scientists created exotic states of matter using electrical circuit enhanced by machine-learning algorithm

Penn engineers create helical topological exciton-polaritons

Researchers at the University of Pennsylvania's School of Engineering and Applied Science are the first to create an even more exotic form of the exciton-polariton, one which has a defined quantum spin that is locked to its direction of motion.

Bridging the gap between the magnetic and electronic properties of topological insulators

Scientists at Tokyo Institute of Technology shed light on the relationship between the magnetic properties of topological insulators and their electronic band structure.

Topological superconducting phase protected by 1D local magnetic symmetries

Scientists from China and USA classified 1D gapped topological superconducting quantum wires with local magnetic symmetries (LMSs), in which the time-reversal symmetry is broken but its combinations with certain crystalline symmetries, such as MxT, C2zT, C4zT, and C6zT, are preserved.

Octupole corner state in a three-dimensional topological circuit

Higher-order topological insulators featuring quantized bulk polarizations and zero-dimensional corner states are attracting increasing interest due to their strong mode confinement.

Quantum simulation for 3D chiral topological phase

Professor Liu at PKU, Professor Du and Professor Wang at USTC build up a quantum simulator using nitrogen-vacancy center to investigate a three-dimensional (3D) chiral topological insulator which was not realized in solid state system, and demonstrate a complete study of both the bulk and surface topological physics by quantum quenches.

Photonic amorphous topological insulator

The current understanding of topological insulators and their classical wave analogues, such as photonic topological insulators, is mainly based on topological band theory.

Recent advances in 2D, 3D and higher-order topological photonics

A research team from South Korea and the USA has provided a comprehensive review covering the recent progress in topological photonics, a recently emerging branch of photonics.

Synthetic dimensions enable a new way to construct higher-order topological insulators

Higher-order topological insulators (HOTIs) are a new phase of matter predicted in 2017, involving complicated high-dimensional structures which show signature physical effects called ''corner modes.'' Now, scientists have proposed a recipe to construct such HOTIs and observe corner modes for photons in simpler, lower-dimensional structures by harnessing an emerging concept called ''synthetic dimensions.'' This construction allows flexible tuning of the topological behavior and opens avenues for even more exotic phases of photons in very high dimensions.

Read More: Topological Insulators News and Topological Insulators Current Events

Wu's research group has been investigating a three-dimensional topological insulator of bismuth telluride (Bi2Te3) as a promising basis for an effective THz system.

Knotting semimetals in topological electrical circuits

Scientists created exotic states of matter using electrical circuit enhanced by machine-learning algorithm

Penn engineers create helical topological exciton-polaritons

Researchers at the University of Pennsylvania's School of Engineering and Applied Science are the first to create an even more exotic form of the exciton-polariton, one which has a defined quantum spin that is locked to its direction of motion.

Bridging the gap between the magnetic and electronic properties of topological insulators

Scientists at Tokyo Institute of Technology shed light on the relationship between the magnetic properties of topological insulators and their electronic band structure.

Topological superconducting phase protected by 1D local magnetic symmetries

Scientists from China and USA classified 1D gapped topological superconducting quantum wires with local magnetic symmetries (LMSs), in which the time-reversal symmetry is broken but its combinations with certain crystalline symmetries, such as MxT, C2zT, C4zT, and C6zT, are preserved.

Octupole corner state in a three-dimensional topological circuit

Higher-order topological insulators featuring quantized bulk polarizations and zero-dimensional corner states are attracting increasing interest due to their strong mode confinement.

Quantum simulation for 3D chiral topological phase

Professor Liu at PKU, Professor Du and Professor Wang at USTC build up a quantum simulator using nitrogen-vacancy center to investigate a three-dimensional (3D) chiral topological insulator which was not realized in solid state system, and demonstrate a complete study of both the bulk and surface topological physics by quantum quenches.

Photonic amorphous topological insulator

The current understanding of topological insulators and their classical wave analogues, such as photonic topological insulators, is mainly based on topological band theory.

Recent advances in 2D, 3D and higher-order topological photonics

A research team from South Korea and the USA has provided a comprehensive review covering the recent progress in topological photonics, a recently emerging branch of photonics.

Synthetic dimensions enable a new way to construct higher-order topological insulators

Higher-order topological insulators (HOTIs) are a new phase of matter predicted in 2017, involving complicated high-dimensional structures which show signature physical effects called ''corner modes.'' Now, scientists have proposed a recipe to construct such HOTIs and observe corner modes for photons in simpler, lower-dimensional structures by harnessing an emerging concept called ''synthetic dimensions.'' This construction allows flexible tuning of the topological behavior and opens avenues for even more exotic phases of photons in very high dimensions.

Read More: Topological Insulators News and Topological Insulators Current Events

Brightsurf.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.